Real Projects
Every supplement tin case in the library — 14 production runs in total, 24 to a page, each one carrying the mould it was made from. Most were built around a daily dose or a scoop, so the shape on each card is a faster way in than scrolling by capacity.
Specified Against the Market
As supplement tin manufacturers, a supplement build is specified against the destination market before it is specified against the artwork — child-resistant and tamper-evident rules change the closure tooling, and retrofitting one is the expensive mistake. Four things get settled before one goes back on the line.
Child-resistant and tamper-evident requirements differ by market and they change the tooling. Name the destination first and the closure on these supplement tin moulds is cut for that regulation, rather than a generic cap being fitted and tested afterwards.
Tablets and capsules fail on humidity long before they fail on expiry. A desiccant recess and a compression-seated lid are specified together, which is what makes a supplement tin with lid a genuine vitamin containers for multiple vitamins format rather than a decorated box.
A pill storage box wants a divider for blister strips or sachets; a powder format wants a scoop recess and a wide mouth. A protein tin container is the same outer body with a completely different inside.
A pill container for daily use is sized to the count you sell — 30, 60 or 90 days — because a half-empty tin reads as poor value on a shelf. A large supplement case is quoted on refill volume instead.
Compliance-Ready by Construction
A supplement packaging tin carries a dose, a label panel and usually a child-safety requirement. Three things decide whether the pack holds up to all of that, and on every case above all three were fixed before printing started.
Applications
A supplement packaging tin is bought in four recognisable patterns, and they divide on one question: tablet, capsule or powder. A round supplement tin, a square supplement tin and a long slim supplement tin all appear above, and each one carries a different closure.
Daily vitamin and mineral formats in a vitamin packing tin, where moisture barrier and a readable supplement facts panel decide the spec.
Capsule and softgel builds where humidity control matters most, usually with a desiccant recess and a tight-seating lid.
Large-format protein powder tin and meal-replacement builds, often with a screw lid, a scoop recess and a wide mouth.
Own-brand supplement packaging tin programmes where label compliance, print accuracy and case-pack configuration matter more than novelty shape.
Mould Register
Every size below comes from a live mould record rather than a typical figure. Any of them can be sampled before you commit to a bespoke die.
| Mould Ref. | Shape | Capacity | Cases | View case |
|---|---|---|---|---|
| TIN-DGGM-00003 | Round Tin | 261ml | 1 | View case |
| TIN-DGGM-00007 | Round Tin | 79ml | 1 | View case |
| TIN-DGGM-00005 | Round Tin | 149ml | 1 | View case |
| TIN-DGGM-00006 | Round Tin | 432ml | 1 | View case |
| TIN-DGGM-00004 | Round Tin | 218ml | 1 | View case |
| TIN-DGGM-00010 | Round Tin | 302ml | 1 | View case |
| TIN-DGGM-00002 | Round Tin | 173ml | 1 | View case |
| TIN-DGGM-00024 | Square Tin | — | 1 | View case |
Material: food-grade tinplate, internal lacquer where the fill needs one. supplement tin MOQ 1,000 pcs per design, pre-production sample 7 days, new mould tooling adds 20–25 days. FOB Ningbo / Shanghai / Shenzhen.
Design Reference
Supplement artwork carries mandatory panels, so the layout is built around regulation rather than adjusted for it.
A vitamin packing tin needs supplement facts, dosage, batch and expiry panels before the brand artwork gets any space. We map those areas into the layout at the start, so nothing has to be squeezed in at the proof stage.
A supplement packaging tin reads as trustworthy when the finish is restrained — a matt body, one accent colour and a crisp logo. Spot UV and a soft-touch varnish give that look without adding a second print pass.
Buying Guide
Four decisions turn one of the cases on this page into your order. On supplements, the first one is the destination market rather than the size.
Child-resistant and tamper-evident requirements differ by market, and they change the closure tooling. Tell us where a vitamin packing tin is selling and the closure is specified for that regulation rather than retrofitted.
A metal vitamin case for tablets, one for pill tins holding capsules, and one for powder are three interiors on one body. Powder needs a scoop recess and a wide mouth; tablets need a divider.
Thirty, sixty and ninety day packs are different heights, and the height decides the mould. Give us the dose count and the body is drawn to it, which is what stops a supplement tin box shipping half empty.
A small pill container for pocket is bought for portability and gets a screw-top and a gasket; a protein powder travel container is bought for volume and gets a wide mouth and a scoop. Which it is sets the whole interior.
Related Ranges
Supplement Tins share a production line with the rest of the tinplate range. The categories below all have live case galleries, so the same construction and the same mould register carry across.
FAQs
The questions that come up most often when buyers spec a supplement tin.
Send your artwork or just a rough sketch and we will come back with shape options, an indicative price and a lead time — usually within one working day. WhatsApp and email both work.
